Bosch Dishwasher Not Draining At End Of Cycle

A Bosch dishwasher is a reliable and efficient appliance for your kitchen, but like any other machine, it can encounter issues over time. One common problem that Bosch dishwasher owners may face is the unit not draining properly at the end of the cycle. This issue can be frustrating, but it’s often fixable without the need for professional repair. In this guide, we’ll walk you through the steps to troubleshoot and resolve this problem.

Step 1: Check for Obstructions in the Drain Hose:


1.2. Locate the drain hose at the back of the dishwasher. It is usually a flexible, ribbed tube.

1.3. Remove the hose and inspect it for any kinks, bends, or clogs. Clear any debris or obstructions that may be preventing proper drainage.

Step 2: Inspect the Sink Drain:

2.1. Ensure that the sink’s drain is not clogged. A blocked sink drain can cause water to back up into the dishwasher.

2.2. Remove any food particles or debris from the sink drain.

Step 3: Check the Drain Pump:

3.1. Access the dishwasher’s drain pump, which is typically located at the bottom of the unit, beneath the spray arm.

3.2. Remove any debris or foreign objects that may be obstructing the pump. This can include broken glass, small utensils, or food particles.

Step 4: Clean the Filters:

4.1. Bosch dishwashers have filters that prevent food particles from clogging the pump and drain. These filters should be cleaned regularly.

4.2. Remove the filters from the bottom of the dishwasher and clean them thoroughly under running water.

Step 5: Check the Air Gap (if applicable):

5.1. If your dishwasher is connected to an air gap (a device that prevents wastewater from flowing back into the dishwasher), inspect it for clogs or obstructions.

5.2. Clean the air gap if necessary.

Step 6: Run a Test Cycle:

6.1. After performing the above steps, reconnect the drain hose, reassemble any components you removed, and restore power to the dishwasher.

6.2. Run a test cycle to see if the problem is resolved. Ensure that the dishwasher drains properly at the end of the cycle.

Step 7: Inspect the Drain Pump Impeller:

7.1. If the problem persists, the issue may be with the drain pump impeller.

7.2. To access the impeller, you may need to disassemble the dishwasher further. Refer to your user manual or seek professional assistance if you’re unsure about this step.

7.3. Check the impeller for damage or obstructions. If it’s damaged, it will need to be replaced.

Step 8: Seek Professional Help (if necessary):

8.1. If you’ve gone through the above steps and the dishwasher still isn’t draining properly, it’s advisable to contact a Bosch service technician or a qualified appliance repair professional.

8.2. They can diagnose and address more complex issues, such as problems with the control board or electrical components.

Step 9: Inspect the Drain Pump Motor:

9.1. If your Bosch dishwasher is still not draining after following the previous steps, it’s time to inspect the drain pump motor.

9.2. The drain pump motor is responsible for expelling the water from the dishwasher. Over time, it may wear out or fail.

9.3. To access the drain pump motor, you may need to remove the dishwasher’s bottom panel. Refer to your user manual for specific instructions.

9.4. Once you have access to the pump motor, check for any visible signs of damage or irregularities. Also, make sure it’s securely connected to the wiring harness.

Step 10: Test the Drain Pump Motor:

10.1. To determine if the drain pump motor is functioning correctly, you can perform a simple test.

10.2. With the dishwasher powered on, initiate a drain cycle. Listen for the sound of the drain pump motor. If you don’t hear any noise, it may indicate a faulty motor.

10.3. You can also use a multimeter to test the motor’s electrical continuity. If it doesn’t register continuity, the motor likely needs replacement.

Step 11: Replace the Drain Pump Motor (if necessary):

11.1. If you’ve confirmed that the drain pump motor is the culprit, it will need to be replaced.

11.2. Consult your dishwasher’s model number and order a compatible replacement motor from Bosch or a certified parts supplier.

11.3. Follow the manufacturer’s instructions for installing the new drain pump motor. This may involve some electrical work, so exercise caution if you’re not experienced with appliance repairs.

Step 12: Preventive Maintenance:

12.1. To avoid future drainage issues, consider implementing regular preventive maintenance for your Bosch dishwasher.

12.2. Clean the dishwasher’s interior, including the spray arms, filters, and the bottom of the tub, regularly to prevent debris buildup.

12.3. Use a dishwasher cleaner or a mixture of vinegar and baking soda to remove mineral deposits and keep the interior clean and odor-free.

Step 13: Consider £Water Softening:

13.1. If you live in an area with hard water, mineral deposits can accumulate in your dishwasher, leading to drainage problems and reduced performance.

13.2. Installing a water softener for your dishwasher or using water softening additives can help prevent mineral buildup and prolong the life of your appliance.

Possible Causes

CauseDescriptionSolutionCost (Estimate)Difficulty Level
Clogged Drain HoseHose is blocked or kinkedCheck hose for blockages or kinksMinimalModerate
Dirty FilterFilter is clogged with debrisRemove and clean filterMinimalEasy
Faulty Drain PumpPump malfunctionReplace the drain pumpModerateModerate
Garbage Disposal IssuesDishwasher connected to disposalCheck disposal for clogs or malfunctionsVariableModerate
Incorrect InstallationImproper plumbing connectionsReview installation and fix mistakesN/ADifficult

Troubleshooting Steps

1. Check Drain HoseInspect the drain hose for clogs or kinks.
2. Clean FilterRemove and clean the dishwasher’s filter.
3. Run Hot WaterRun hot water in the sink before starting a cycle.
4. Check Garbage DisposalEnsure the disposal is working correctly.
5. Test Drain PumpManually test the drain pump for functionality.

Additional Tips

Use High-Quality DetergentQuality detergent can prevent drain issues.
Avoid OverloadingOverloading can disrupt draining.
Regular MaintenanceKeep filters and components clean and check.
Call Professional HelpIf issues persist, seek professional repair.

Maintenance Schedule

Clean FilterWeekly
Inspect Drain HoseMonthly
Run Hot WaterBefore Each Cycle
Test Drain PumpBiannually
Check Garbage DisposalAs Needed

Estimated Costs

Repair/ReplacementCost Range
Clogged Drain Hose$20 – $50
Filter CleaningFree
Drain Pump Replacement$100 – $200
Garbage Disposal RepairsVariable
Professional InstallationVaries by provider



A Bosch dishwasher not draining can be caused by a variety of issues, ranging from simple obstructions to more complex motor or electrical problems. By systematically following these troubleshooting steps, you can often identify and resolve the issue. Remember that safety is essential, and if you’re not comfortable with any aspect of the repair process, it’s best to seek professional assistance. Regular maintenance and care will also help keep your Bosch dishwasher running smoothly for years to come.


Bosch Dishwasher Not Draining At End Of Cycle

Leave a Comment