Frigidaire Dishwasher Stuck On Wash Cycle

A dishwasher stuck on the wash cycle can be a frustrating issue, as it prevents the dishwasher from completing its cleaning cycle and can lead to dirty dishes piling up. If you own a Frigidaire dishwasher and find yourself facing this problem, don’t worry; there are several steps you can take to troubleshoot and potentially resolve the issue. In this guide, we will outline a step-by-step process to diagnose and fix a Frigidaire dishwasher that is stuck on the wash cycle.

1. Check for Basic Issues


If your dishwasher is stuck mid-cycle, the first step is to attempt to cancel the wash cycle. Here’s how:

  • Press the “Cancel” button on the dishwasher’s control panel. This should interrupt the wash cycle and allow you to start a new cycle.
  • Wait for a few minutes to see if the dishwasher responds. Sometimes, it may take a moment to register the cancel command.

3. Reset the Dishwasher

If canceling the cycle doesn’t work, you can try resetting the dishwasher. Here’s how to do it:

  • Unplug the dishwasher or turn off its power at the circuit breaker for about 5-10 minutes.
  • Plug it back in or turn the power back on.
  • Attempt to start a new wash cycle. The reset may have cleared any temporary issues causing the dishwasher to be stuck.

4. Check for Error Codes

Frigidaire dishwashers are equipped with error code systems that can provide valuable diagnostic information. Refer to your dishwasher’s manual to understand how to access and interpret error codes. Once you have the error code, you can search for specific solutions related to that code in the manual or online.

5. Inspect the Timer/Control Board

If none of the above steps resolve the issue, there may be a problem with the timer or control board. These components control the dishwasher’s cycle progression. However, replacing these parts can be complex and may require professional assistance. If your dishwasher is under warranty, contact Frigidaire customer service for guidance.

6. Contact Frigidaire Customer Support or a Technician

If you’ve exhausted all the troubleshooting steps and your dishwasher is still stuck on the wash cycle, it’s time to seek professional help. Contact Frigidaire’s customer support or schedule a service appointment with a certified technician who specializes in appliance repair. They will have the expertise and tools to diagnose and fix the issue accurately.

7. Inspect the Spray Arm

Another common issue that can cause a dishwasher to get stuck on the wash cycle is a blocked or malfunctioning spray arm. The spray arm is responsible for distributing water throughout the dishwasher to clean the dishes effectively. If it’s clogged or not spinning correctly, it can disrupt the wash cycle.

Here’s what you can do:

  • Open the dishwasher door and inspect the spray arm(s) for any debris or foreign objects that might be blocking them.
  • Gently rotate the spray arm to ensure it moves freely. If it feels stuck, you may need to remove it for a more thorough cleaning.
  • Clean the spray arm with a soft brush or a toothpick to dislodge any debris.
  • Reattach the spray arm and close the dishwasher door.
  • Try running a short wash cycle to see if the issue is resolved. If the spray arm still doesn’t spin or the dishwasher remains stuck, move on to the next step.

8. Examine the Float Switch

The float switch is a safety device in your dishwasher that prevents overfilling. If it detects that there’s too much water in the dishwasher, it can cause the dishwasher to get stuck in the wash cycle. Here’s how to check and potentially fix the float switch:

  • Locate the float assembly at the bottom of the dishwasher tub. It’s usually a small, dome-shaped device.
  • Gently lift the float assembly and check for any debris or foreign objects that may be obstructing its movement.
  • If you find debris, clean it away, and make sure the float moves freely up and down.
  • Close the dishwasher door and try running a wash cycle again to see if the issue is resolved.

9. Assess the Drain Pump

A malfunctioning drain pump can also lead to a dishwasher being stuck on the wash cycle, especially if it’s unable to remove dirty water from the dishwasher. Here’s how to inspect and potentially fix the drain pump:

  • Ensure the dishwasher is unplugged or disconnected from power.
  • Locate the drain pump, usually at the bottom of the dishwasher. It may be accessible from the front or rear of the machine.
  • Check the pump for any obstructions or debris that might be preventing it from functioning correctly.
  • If you find an obstruction, remove it carefully.
  • Reconnect the dishwasher to power and try running a wash cycle. If the dishwasher completes the cycle without getting stuck, the drain pump was likely the issue.

10. Regular Maintenance

To prevent future issues with your Frigidaire dishwasher, consider implementing regular maintenance:

  • Clean the dishwasher’s filter regularly to prevent blockages.
  • Check the seals and gaskets for signs of wear or damage and replace them if necessary.
  • Use a dishwasher cleaner periodically to remove mineral deposits and buildup.
  • Ensure you are using the right detergent and loading the dishwasher correctly according to the manufacturer’s guidelines.

Common Causes of Dishwasher Stuck on Wash Cycle

Faulty TimerThe dishwasher’s timer may be malfunctioning, causing it to get stuck on the wash cycle.
Door Latch IssueA faulty door latch or door switch can prevent the dishwasher from advancing in the cycle.
Water Inlet ValveA malfunctioning water inlet valve may not allow enough water to enter, leading to cycle issues.
Clogged Spray ArmA clogged or blocked spray arm can affect water distribution during the wash cycle.
Control Board ProblemProblems with the control board can cause the dishwasher to not follow the programmed cycle.

Troubleshooting Steps

1. Check TimerInspect the dishwasher’s timer for any visible damage or malfunction. Replace if necessary.
2. Test Door LatchEnsure the door latch and switch are working correctly. Replace any faulty components.
3. Inspect Water Inlet ValveExamine the water inlet valve for blockages and proper functioning. Replace if needed.
4. Clean Spray ArmRemove and clean the spray arm to ensure proper water flow during the wash cycle.
5. Test Control BoardCheck the control board for error codes or malfunctions. Replace if the board is faulty.

Error Codes

Error CodeMeaning
E1Timer or control board malfunction.
E2Door latch or switch issue.
E3Water inlet valve problem.
E4Spray arm or water distribution issue.
E5General control board failure.

Replacement Parts

TimerControls the dishwasher’s cycle timing.
Door LatchEnsures the door is securely closed.
Water Inlet ValveRegulates water flow into the dishwasher.
Spray ArmDistributes water during the wash cycle.
Control BoardManages the dishwasher’s operations.

Professional Assistance

IssueWhen to Seek Professional Help
Electrical ProblemsIf you suspect an electrical issue, it’s best to consult a technician.
Complex RepairsFor control board or timer replacement, consider professional assistance.
Persistent ProblemsIf the issue persists after DIY troubleshooting, call a technician.
Warranty CoverageCheck if your dishwasher is under warranty for cost-effective repairs.
Safety ConcernsIf there are safety concerns, seek professional help immediately.



A Frigidaire dishwasher stuck on the wash cycle can often be resolved by following these additional troubleshooting steps. By inspecting and cleaning components like the spray arm, float switch, and drain pump, you can address common issues that might cause the dishwasher to malfunction. However, if the problem persists, it’s crucial to reach out to Frigidaire customer support or a professional technician for a thorough diagnosis and repair. Proper maintenance can also help prevent such issues from occurring in the future, ensuring your dishwasher continues to work efficiently.


Frigidaire Dishwasher Stuck On Wash Cycle

Leave a Comment