GE Dishwasher Won’t Start But Has Power

If you own a GE dishwasher that won’t start but appears to have power, it can be frustrating. However, before calling for professional help, there are several steps you can take to diagnose and potentially resolve the issue. This guide will walk you through the troubleshooting process step by step.

1. Confirm Power Supply


GE dishwashers are equipped with safety features that prevent them from starting if the door is not properly latched. Examine the dishwasher’s door latch:

a. Door Latch Inspection

  1. Open and close the dishwasher door firmly. Make sure it clicks securely into place.
  2. Inspect the door gasket (seal) for any damage or debris that might prevent a proper seal.

b. Safety Interlock

  1. Some models have a safety interlock system that won’t allow the dishwasher to start if the door is not fully closed. Ensure the door is firmly closed.

3. Control Panel and Settings

If the power supply and door latch are not the issue, the problem may be related to the control panel or settings.

a. Control Lock Feature

  1. Check if the control lock feature is engaged. If it is, the dishwasher won’t start. Refer to your user manual to learn how to disable it.

b. Reset the Control Panel

  1. Reset the dishwasher by turning off the power at the circuit breaker or unplugging it for a few minutes. Then, plug it back in or switch the circuit breaker back on. This can sometimes clear minor glitches.

c. Check for Error Codes

  1. Some GE dishwashers have a display that shows error codes. If you see an error code, consult your user manual to determine the cause and possible solutions.

4. Water Supply

A dishwasher won’t start if it doesn’t have access to water. Check the water supply:

a. Water Valve

  1. Ensure that the water supply valve under your sink, which provides water to the dishwasher, is fully open.

b. Water Inlet Valve

  1. The water inlet valve inside the dishwasher may be clogged or malfunctioning. You might need to clean or replace it if it’s not allowing water to flow.

5. Overfill Float Switch

The overfill float switch is a safety feature that prevents the dishwasher from starting if there’s too much water inside.

a. Check for Water Overflow

  1. Open the dishwasher door and look for any visible water pooling at the bottom. If you see excessive water, there may be a leak or a drainage issue that needs to be addressed.

6. Professional Help

If you’ve gone through all the above steps and your GE dishwasher still won’t start, it’s time to consider professional help. Contact GE customer service or a certified technician who specializes in dishwasher repairs. They can diagnose and fix more complex issues such as faulty control boards or motor problems.

7. Check the Timer

Some dishwasher models have a timer that delays the start of the cycle. Make sure the timer is set correctly, or if your dishwasher has a delayed start feature, confirm that it’s not activated.

8. Inspect the Control Panel

The control panel may have a loose connection or a malfunctioning button. Try the following:

a. Visual Inspection

  1. Examine the control panel for any visible damage, like cracks or loose buttons.

b. Button Testing

  1. Gently press all the buttons on the control panel to ensure they are responsive. If a button feels stuck or unresponsive, it may need cleaning or replacement.

9. Drainage Issues

Dishwashers won’t start if they detect a drainage problem from a previous cycle. Check for blockages in the dishwasher’s drainage system:

a. Filter and Drain Basket

  1. Remove the dishwasher’s filter and drain basket and clean them thoroughly. Accumulated debris can interfere with proper drainage.

b. Drain Hose

  1. Inspect the drain hose for kinks, clogs, or damage. Ensure it’s properly connected to your plumbing system.

Possible Causes

CauseDescriptionSolutionAdditional Notes
Power Supply IssueDishwasher is not getting powerCheck power source and connectionsEnsure the outlet is working
Door Latch ProblemDoor latch or interlock switch issueInspect and replace latch if necessaryCheck for any visible damage
Control Panel DefectControl panel malfunctionReset control panel or replaceLook for error codes
Faulty Start ButtonStart button or switch not functioningReplace the start button or switchTest other control buttons
Wiring or Fuse ProblemWiring or fuse damage within the applianceExamine wiring and replace damaged partsCheck circuit breakers

 Diagnostic Steps

1. Power CheckVerify power source and connections.
2. Door InspectionExamine door latch and switches.
3. Control Panel ResetAttempt to reset the control panel.
4. Button TestTest the start button and other controls.
5. Wiring InspectionInspect internal wiring and fuses.


Power CheckPower source and connections are fine.
Door InspectionDoor latch appears damaged and needs replacing.
Control Panel ResetControl panel reset successfully, but issue persists.
Button TestStart button is not responding.
Wiring InspectionNo visible damage to wiring, but fuse needs replacing.

 Parts and Components

Part/ComponentPart NumberDescriptionReplacement Cost
Door Latch Assembly12345Replacement door latch$20
Start Button67890Replacement start button$15
Control Panel54321Replacement control panel$50
Internal Fuse13579Replacement fuse$5
Wiring Harness24680Replacement wiring harness$30

Next Steps

1. Replace Door LatchInstall a new door latch assembly.
2. Replace Start ButtonInstall a new start button.
3. Replace Control PanelInstall a new control panel.
4. Replace FuseReplace the internal fuse.
5. ReassembleReassemble the dishwasher and test the start function.

10. Temperature Selection

Some dishwasher models require a minimum water temperature to start a cycle. If your water heater isn’t set to a high enough temperature, your dishwasher might not start. Check your user manual for the recommended water temperature.

11. Test Different Cycles

Try selecting different wash cycles to see if the issue is specific to one cycle. If it starts with another cycle, it could indicate a problem with a particular wash mode or sensor.

12. Control Board

The control board is the brain of your dishwasher. If it’s malfunctioning, it can prevent the dishwasher from starting. However, diagnosing and repairing control board issues usually require professional expertise.

13. Warranty Information

Check your dishwasher’s warranty status. If it’s still under warranty, consider contacting GE’s customer service for repairs or replacements. Attempting to fix the dishwasher yourself could void the warranty.

14. User Manual

Always consult your dishwasher’s user manual for specific troubleshooting steps and guidance. It may provide valuable information on common issues and solutions for your particular model.

Remember to exercise caution while troubleshooting and avoid attempting complex repairs if you’re not experienced with appliance repair. If in doubt, it’s safer to seek professional help to prevent further damage or electrical hazards.

In conclusion, resolving the issue of a GE dishwasher not starting but having power may require a systematic approach, considering various components and potential problems. By following these additional troubleshooting steps and consulting your user manual, you can increase your chances of identifying and resolving the problem.

GE Dishwasher Won’t Start But Has Power


In conclusion, when your GE dishwasher won’t start but has power, it’s essential to methodically troubleshoot the issue. Many problems can be resolved with simple checks and adjustments, but for more complicated issues, don’t hesitate to seek professional assistance to get your dishwasher running smoothly again.

Leave a Comment