GE Washer Fills with Water Then Stops

When your GE washer fills with water but then stops without completing its cycle, it can be frustrating and inconvenient. Several factors can contribute to this issue, ranging from simple user errors to more complex mechanical problems. In this guide, we’ll explore the possible causes and solutions for a GE washer that fills with water but fails to continue its cycle.

1. Check for User Errors:


Another common reason for a washer filling with water and then stopping is a problem with the water supply:

  • Water Supply Valves: Check that the water supply valves are fully open. If they are partially closed, it may not allow enough water to fill the washer, triggering a pause in the cycle.
  • Water Inlet Filters: Sediment or debris in the water inlet filters can restrict water flow. Clean or replace these filters if necessary.

3. Drainage Problems:

If the washer can’t drain water properly, it may stop the cycle:

  • Clogged Drain Hose: A clogged or kinked drain hose can prevent water from draining. Ensure the drain hose is free from obstructions and positioned correctly.
  • Drain Pump Issues: Inspect the drain pump for clogs or damage. If it’s not working correctly, it may halt the cycle. Replace or repair the pump as needed.

4. Load Imbalance:

Washers have built-in mechanisms to detect load imbalances that can stop the cycle for safety reasons:

  • Overloaded Washer: If you’ve overloaded the washer, it might stop to prevent damage. Remove some items to balance the load and restart the cycle.

5. Control Panel or Electronic Issues:

Problems with the washer’s control panel or electronic components can lead to cycle interruptions:

  • Control Panel Malfunction: Check if any buttons or the control panel itself are unresponsive or damaged. A malfunctioning control panel may need to be replaced.
  • Electronic Control Board: The electronic control board can fail, causing cycle disruptions. If other solutions don’t work, consider inspecting or replacing this component.

6. Pressure Switch and Water Level Sensor:

The pressure switch and water level sensor work together to monitor water levels in the washer. If they malfunction, it can lead to cycle interruptions:

  • Pressure Switch: The pressure switch detects the water level in the drum. If it fails, the washer may not proceed with the cycle. Test and replace it if necessary.
  • Water Level Sensor: The water level sensor provides feedback to the washer’s control board. If it’s faulty, it can cause cycle issues. Inspect and replace it if needed.

7. Timer or Motor Problems:

The washer’s timer or motor controls the various cycles. If these components fail, it can result in cycle stoppages:

  • Timer: A malfunctioning timer may not advance to the next cycle stage. Test and replace it if required.
  • Motor Issues: Check the motor for signs of wear or damage. A faulty motor can prevent the washer from moving through its cycles. Repair or replace it as necessary.

8. Faulty Lid Switch:

Many washing machines, including GE models, have a lid switch that prevents the washer from operating when the lid is open. If the lid switch is malfunctioning or damaged, it can interrupt the cycle even if the lid is closed:

  • Lid Switch Inspection: Check if the lid switch mechanism is working correctly. Sometimes, it might just need a simple adjustment or cleaning. If it’s damaged or non-functional, it should be replaced.

9. Sensor and Water Temperature Issues:

Modern washing machines often have sensors that monitor water temperature and other conditions for optimal washing. Issues with these sensors can lead to cycle interruptions:

  • Temperature Sensor: If the washer detects an issue with water temperature, it might pause the cycle. Test and replace the temperature sensor if needed.

10. Software and Control Board Updates:

Some GE washing machines can experience cycle interruptions due to software glitches. Manufacturers occasionally release firmware or software updates to address these issues:

  • Check for Updates: Visit the GE website or contact customer support to see if there are any software updates available for your washing machine. Updating the software may resolve intermittent problems.

11. Wear and Tear:

Washing machines, like all appliances, can experience wear and tear over time. This can lead to various mechanical issues:

  • Bearing and Belt Wear: If you hear unusual noises during the cycle, it could indicate worn bearings or belts. Replacing these components can restore proper functioning.

12. Professional Technician Consultation:

If you’ve exhausted all the above troubleshooting steps and your GE washer still fills with water but stops, it might be time to consult a professional appliance technician. They have the expertise and tools to diagnose and repair complex issues.

Common Symptoms

SymptomDescriptionPossible CausesPotential SolutionsAdditional Notes
Washer stops fillingWasher begins filling with water, but then abruptly stops.1. Faulty water inlet valve. 2. Clogged water inlet filter. 3. Control board malfunction.1. Replace the water inlet valve. 2. Clean or replace the water inlet filter. 3. Check and replace the control board if necessary.– Check water pressure. – Ensure water supply is not interrupted.

Troubleshooting Steps

StepDescriptionActionExpected OutcomeAdditional Notes
Check water supplyVerify that the water supply to the washer is sufficient and not interrupted.Inspect water hoses and connections.Steady water flow to the washer.– Ensure water valves are fully open. – Check for kinks in hoses.

Water Inlet Valve Testing

TestDescriptionEquipment NeededProcedureResults
Continuity TestCheck for continuity across the terminals of the water inlet valve.MultimeterDisconnect power. Remove valve. Test terminals for continuity.Continuity indicates a functional valve. No continuity suggests a faulty valve.
Water Flow TestObserve water flow through the valve when powered.Water supply, power sourceApply power to the valve while observing water flow.Proper water flow indicates a functional valve. Insufficient or no flow suggests a problem.

Control Board Checks

CheckDescriptionEquipment NeededProcedureResults
Visual InspectionExamine the control board for visible damage, burns, or loose connections.FlashlightInspect the control board.Visible damage or loose connections may indicate a problem.
Diagnostic ModeAccess the washer’s diagnostic mode to check for error codes.Service manual, washer controlsFollow the manufacturer’s instructions to enter diagnostic mode.Error codes can help pinpoint issues with the control board or other components.

Water Inlet Filter Maintenance

Maintenance TaskDescriptionFrequencyProcedureAdditional Notes
Clean or ReplaceRegularly clean or replace the water inlet filter.Every 6-12 monthsLocate the filter near the water inlet valve. Remove and clean or replace it.A clogged filter can restrict water flow and cause filling issues.




A GE washer that fills with water but stops can be caused by a wide range of factors, including mechanical, electrical, and electronic problems. By methodically checking and addressing these potential issues, you can often identify and resolve the problem. However, for more complex issues or if you’re unsure about the diagnosis and repair process, it’s best to seek professional assistance. Regular maintenance and prompt attention to any issues can help ensure your washer functions smoothly for years to come.


GE Washer Fills with Water Then Stops

Leave a Comment