KitchenAid Dishwasher Control Panel Not Working

A malfunctioning control panel on your KitchenAid dishwasher can be frustrating, as it hinders the appliance’s ability to function properly. However, before calling for professional repair services, you can try some troubleshooting steps to potentially identify and resolve the issue. Here’s a detailed guide on how to address a KitchenAid dishwasher control panel that’s not working:

Safety Precautions


Start by visually inspecting the control panel for any visible issues:

  1. Check for Loose Wires: Look for any loose or disconnected wires around the control panel. Reconnect any disconnected wires securely.
  2. Cleanliness: Ensure the control panel is clean and free from any food particles, grease, or residue. Use a soft cloth or sponge and a mild detergent to clean it.

Reset the Dishwasher

Sometimes, a simple reset can resolve control panel issues:

  1. Hard Reset: Disconnect the dishwasher from power for a few minutes (at least 5-10 minutes). Then, reconnect it and turn it on. This can often reset the control panel and resolve minor glitches.

Examine the Control Lock Feature

KitchenAid dishwashers often come equipped with a control lock feature, which can inadvertently get activated:

  1. Control Lock Indicator: Check if the control lock indicator is lit. If it is, the control panel is locked. To unlock it, press and hold the “Control Lock” or “Lock” button for several seconds until the indicator light turns off.

Check the Door Latch

A malfunctioning door latch can affect the dishwasher’s control panel:

  1. Door Latch Inspection: Ensure that the dishwasher door is closing properly and that the door latch is engaged securely. If not, you may need to replace the latch.

Test the Control Buttons

If certain buttons on the control panel are unresponsive, it might be due to button issues:

  1. Button Press: Test each control panel button to see if it responds when pressed. If specific buttons are not working, they may need to be replaced.

Inspect the Control Board

The control board, also known as the control module, is the brain of your dishwasher. Malfunctions in the control board can affect the entire control panel:

  1. Control Board Inspection: Check for any signs of damage or burnt components on the control board. If you notice any, it’s best to replace the control board. Consult your dishwasher’s manual for instructions on how to access and replace it.

Call for Professional Help

If none of the above steps resolve the issue, it’s advisable to contact a professional technician or KitchenAid customer service for further assistance. They can diagnose and repair complex control panel problems and ensure your dishwasher operates safely and efficiently.

Remember to always refer to your dishwasher’s user manual for specific instructions and safety guidelines, as dishwasher models can vary. While some issues can be resolved through DIY troubleshooting, others may require the expertise of a trained technician.


Additional Troubleshooting Steps

If you’re still facing issues with your KitchenAid dishwasher control panel not working, consider these additional troubleshooting steps:

1. Check the Power Supply

  1. Power Outlet: Verify that the power outlet your dishwasher is connected to is functional. Plug in another appliance or device to ensure the outlet is providing power.
  2. Circuit Breaker: Check your home’s circuit breaker panel for any tripped breakers. Reset the breaker if necessary, as a tripped breaker could cut off power to the dishwasher.

2. Examine the Wiring

  1. Inspect Wiring Connections: Carefully inspect the wiring harness connections to the control panel. Loose or damaged wires can prevent the control panel from functioning correctly. If you find any issues, repair or replace the wires as needed.
  2. Fuses: Some dishwashers have internal fuses that can blow. If your dishwasher has one, check if the fuse has blown and replace it if necessary. Refer to your dishwasher’s manual for fuse location and specifications.

3. Test for Faulty Components

  1. Control Panel Buttons: If only certain buttons on the control panel are unresponsive, consider testing them using a multimeter. If they are malfunctioning, you may need to order replacement buttons or the entire control panel.
  2. Control Board Testing: If you have experience with electronics, you can use a multimeter to test the control board’s various components. Be cautious with this step, as it requires electrical expertise. If you’re not confident in your abilities, it’s best to consult a professional.

4. Software Reset

  1. Factory Reset: Some modern dishwashers have a factory reset option. Refer to your user manual for instructions on how to perform a factory reset, which can often resolve software-related issues.

5. Run Diagnostic Tests

  1. Service Mode: Some KitchenAid dishwashers have a diagnostic or service mode that can help identify problems. Refer to your user manual for instructions on how to enter this mode and interpret error codes or diagnostic messages.

6. Contact Customer Support

  1. Manufacturer Support: If you’re unable to diagnose or resolve the issue on your own, consider contacting KitchenAid’s customer support or visiting their website. They often provide troubleshooting guides and may be able to offer specific advice for your model.
  2. Warranty Information: Check if your dishwasher is still under warranty. If it is, KitchenAid may cover the cost of repairs or replacements.

7. Professional Repair

If none of the above steps resolves the problem, it’s time to consider professional repair services:

  1. Certified Technician: Contact a certified appliance repair technician who specializes in KitchenAid appliances. They have the experience and tools to diagnose and fix complex issues.
  2. Replacement Parts: If specific components are identified as faulty (such as the control board or buttons), make sure to use genuine KitchenAid replacement parts for the repair.

Common Symptoms

SymptomDescriptionPossible CausesTroubleshooting TipsRecommended Action
Control Panel DarkThe control panel is not displaying any lights.Power supply issues1. Check power supply. 2. Replace fuse.Verify power source.
Buttons UnresponsiveButtons do not respond when pressed.Control board malfunction1. Restart dishwasher. 2. Check control board.Replace control board.
Error CodesError codes are displayed on the panel.Faulty sensors or componentsRefer to the user manual for error code info.Address the specific error.
Partial FunctionalitySome buttons or features work intermittently.Wiring or keypad issues1. Inspect wiring. 2. Clean keypad.Repair or replace as needed.
Panel Lights FlashingPanel lights flash or flicker unexpectedly.Electrical or control issues1. Check electrical connections. 2. Reset.Seek professional assistance.

Possible Causes

Power Supply IssuesProblems with the electrical power source.Check power outlet, circuit breaker, and power cord.
Control Board MalfunctionFailure of the dishwasher’s control board.Inspect for damage or loose connections. Replace if necessary.
Faulty Sensors or ComponentsSensors or essential components are malfunctioning.Test and replace damaged sensors or components.
Wiring or Keypad IssuesProblems with the wiring or keypad connections.Examine and repair damaged wiring or clean keypad contacts.
Electrical or Control IssuesBroader electrical or control system problems.Consult a professional technician for a thorough diagnosis.

 Troubleshooting Tips

IssueTroubleshooting Steps
Control Panel Dark1. Verify power supply to the dishwasher. 2. Replace a blown fuse.
Buttons Unresponsive1. Restart the dishwasher. 2. Check for loose or damaged connections.
Error CodesRefer to the user manual for error code meanings and potential fixes.
Partial Functionality1. Inspect the wiring for damage. 2. Clean the keypad.
Panel Lights Flashing1. Examine electrical connections. 2. Try resetting the dishwasher.

Recommended Actions

IssueRecommended Action
Control Panel DarkEnsure a stable power source; check the power cord.
Buttons UnresponsiveReplace the control board if connections are intact.
Error CodesAddress the specific error code as per the user manual.
Partial FunctionalityRepair or replace wiring, or replace the keypad.
Panel Lights FlashingSeek professional assistance for electrical diagnostics.

Professional Assistance

Symptoms Requiring Professional HelpDescription
Control panel remains unresponsiveExtensive control board or electrical issues.
Frequent recurrence of error codesPersistent underlying problems within the appliance.
Complex wiring or electrical issuesExtensive wiring or electrical system complications.
Control panel replacement neededControl board replacement due to severe malfunction.
Panel lights continue to flickerOngoing electrical instability in the dishwasher.


Remember that dishwashers contain electrical components and can be complex machines. If you’re unsure about any step in the troubleshooting process, or if you’re not comfortable working with electrical appliances, it’s safer to seek professional assistance to avoid any accidents or further damage to your dishwasher.


KitchenAid Dishwasher Control Panel Not Working

Leave a Comment