Maytag Washer Sounds Like a Jet Engine

A washing machine is an essential appliance in most households, designed to make our lives more convenient. However, when your Maytag washer starts making a noise resembling a jet engine, it can be alarming and disruptive. In this guide, we will explore the potential reasons behind this issue and provide step-by-step troubleshooting solutions to help you resolve the problem.

 Identify the Noise


Identifying the specific noise will help pinpoint the problem more accurately.

Possible Causes

Once you’ve identified the jet engine-like noise, you can explore potential causes:

  1. Unbalanced Load: A common cause of unusual noises during the spin cycle is an unbalanced load. Uneven distribution of clothes inside the drum can lead to excessive vibrations and noise.
  2. Damaged or Worn Bearings: Over time, the bearings that support the washer drum can wear out or become damaged, resulting in a loud noise during spinning.
  3. Loose Parts: Loose or damaged components, such as belts, pulleys, or motor mounts, can cause excessive noise when the machine is in operation.
  4. Foreign Objects: Small objects like coins or buttons can become lodged in the drum or pump, creating a noisy obstruction.
  5. Worn Drive Belt: A worn-out or damaged drive belt can produce a high-pitched squealing noise.

Troubleshooting Steps

Now, let’s discuss steps to troubleshoot and resolve the issue:

  1. Check the Load: Ensure that the load inside the washer is balanced. Rearrange clothes if necessary to distribute the weight evenly.
  2. Inspect for Foreign Objects: Turn off the machine and check for any foreign objects, like coins or small items, that might be trapped in the drum or pump. Remove them if found.
  3. Tighten Loose Parts: Inspect the washer’s components, including belts, pulleys, and motor mounts. Tighten or replace any loose or damaged parts.
  4. Check for Damaged Bearings: If the noise persists, it may be due to worn-out bearings. Replacing these bearings might require professional assistance.
  5. Inspect the Drive Belt: If you hear a high-pitched squealing noise, examine the drive belt for wear and tear. If it’s damaged, consider replacing it.

 Maintenance and Prevention

To prevent your Maytag washer from sounding like a jet engine in the future:

  1. Regular Cleaning: Periodically clean the drum and the inside of the machine to remove lint, dirt, and detergent buildup.
  2. Balance Loads: Always load the washer evenly to prevent imbalance and minimize noise during spinning.
  3. Professional Maintenance: Schedule regular maintenance checks by a qualified technician to catch and address potential issues early.

Calling for Professional Help

In some cases, troubleshooting steps might not entirely resolve the issue, or you might not feel comfortable performing certain repairs yourself. In such situations, it’s wise to call a professional appliance technician. They have the expertise and tools to diagnose and fix complex issues, especially those related to the machine’s internal components like bearings or motor problems.

When seeking professional help:

  1. Choose a Reputable Technician: Look for certified appliance repair professionals or authorized Maytag service centers. They have the training and access to genuine parts for your machine.
  2. Describe the Issue: When scheduling a service appointment, provide a detailed description of the noise and any troubleshooting steps you’ve taken. This information helps the technician prepare for the visit.
  3. Ask for a Quote: Before the technician begins any work, ask for a written estimate of the repair costs. This ensures transparency and helps you make an informed decision.

Extending the Lifespan of Your Maytag Washer

Maintaining your washer properly can prevent future noise issues and extend its lifespan:

  1. Use the Right Detergent: Always use the detergent recommended for your specific Maytag model. Using the wrong type or excessive detergent can lead to buildup and operational issues.
  2. Clean the Lint Filter: Regularly clean the lint filter to prevent clogs that can impede water flow and cause problems.
  3. Inspect Hoses and Connections: Periodically check the water supply hoses and connections for leaks or damage. Replace them if needed.
  4. Balance the Machine: Ensure that your washer is level on the floor. You can adjust the leveling legs to eliminate any wobbling during operation.
  5. Reduce Overloading: Avoid overloading your washer as it can strain the machine and lead to unusual noises. Refer to the manufacturer’s guidelines for load capacity.

Common Causes

Unbalanced LoadClothes unevenly distributed in the drum.Rearrange clothes evenly.LowEasy
Loose ComponentsLoose parts or bolts inside the machine.Tighten or replace parts.ModerateModerate
Worn BearingsWorn-out drum bearings.Replace bearings.HighDifficult
Foreign ObjectsForeign objects stuck between the drum and tub.Remove objects carefully.LowEasy
Damaged Suspension SystemDamaged shock absorbers or springs.Replace suspension system.ModerateModerate

Troubleshooting Steps

ProblemDescriptionSteps to SolveTime RequiredTools Required
Excessive NoiseWasher is making loud noises like a jet engine during operation.1. Check for unbalanced load. 2. Inspect for loose components. 3. Examine bearings. 4. Look for foreign objects. 5. Inspect suspension system.VariesScrewdriver, wrench, pliers, flashlight
Unusual VibrationsWasher shakes excessively during the spin cycle.1. Ensure the machine is level. 2. Check for an unbalanced load. 3. Inspect suspension system.VariesLevel, wrench, flashlight
Grinding SoundsWasher produces a grinding noise while agitating or spinning.1. Investigate worn bearings. 2. Check for foreign objects. 3. Examine the drum.VariesScrewdriver, pliers, flashlight
Rattling or ClankingWasher makes rattling or clanking noises during operation.1. Look for loose components. 2. Inspect the drum for foreign objects. 3. Check for loose bolts.VariesScrewdriver, pliers, wrench
Continuous Loud HummingWasher emits a constant loud hum during operation.1. Check the motor. 2. Inspect the belt. 3. Examine the pulley. 4. Check for loose parts.VariesScrewdriver, pliers, flashlight, wrench

Costs for Common Repairs

RepairDescriptionAverage Cost
Bearing ReplacementReplacing worn-out drum bearings.$100 – $200
Suspension SystemReplacing shock absorbers or springs.$50 – $150
Loose Component RepairTightening or replacing loose parts.$20 – $100
Motor ReplacementReplacing a faulty motor.$150 – $300
Belt and Pulley RepairRepairing or replacing the belt and pulley.$30 – $80

Difficulty Levels

RepairDifficulty Level
Bearing ReplacementDifficult
Suspension SystemModerate
Loose Component RepairEasy
Motor ReplacementDifficult
Belt and Pulley RepairModerate

Preventive Maintenance

Maintenance TaskFrequencyDescription
Regular InspectionMonthlyCheck for loose components and foreign objects.
Load BalancingBefore each cycleDistribute clothes evenly for balanced loads.
Leveling AdjustmentAs neededEnsure the washer is level on the floor.
LubricationAnnuallyLubricate moving parts as recommended.
Clean FiltersEvery 3-6 monthsClean or replace filters to maintain airflow.


A Maytag washer that sounds like a jet engine is a common issue that can be resolved through proper diagnosis and troubleshooting. By following the steps mentioned in this guide, you can pinpoint the cause of the noise and take appropriate action to fix it. Regular maintenance and preventive measures are key to ensuring your Maytag washer operates quietly and efficiently for years to come, saving you both money and the inconvenience of a noisy appliance. If all else fails, don’t hesitate to seek professional help to ensure your washer is in optimal working condition.


Maytag Washer Sounds Like a Jet Engine

Leave a Comment