Whirlpool Microwave Fan Won’t Turn Off Or On

Microwaves are essential kitchen appliances, and when an issue arises, it can be frustrating. If your Whirlpool microwave fan won’t turn off or on, it’s important to diagnose and address the problem promptly. This guide will help you troubleshoot the issue step by step.

1. Check Power Supply


a. Plug: Make sure the microwave is correctly plugged into a functioning power outlet. Try plugging another device into the same outlet to verify its functionality.

b. Circuit Breaker: Check your home’s circuit breaker or fuse box. If a circuit has tripped or a fuse has blown, it may disrupt power to the microwave.

c. GFCI Outlet: If your microwave is plugged into a Ground Fault Circuit Interrupter (GFCI) outlet, make sure the GFCI hasn’t tripped. Reset it if necessary.

2. Control Panel

Sometimes, issues with the microwave’s control panel can affect the fan. Here’s what you can do:

a. Reset the Microwave: Unplug the microwave for a few minutes, then plug it back in. This can often reset the control panel, resolving minor issues.

b. Test Other Functions: Check if other functions of the microwave (e.g., cooking, timer) are working. If they are, it may not be a control panel issue.

3. Fan Settings

Ensure you are using the correct fan settings:

a. Fan Speed: Make sure you have selected the desired fan speed. Most microwaves have multiple fan speed settings, including “High,” “Low,” and “Off.”

b. Delayed Fan: Some microwaves have a delayed fan feature that runs the fan for a short time after cooking to cool the internal components. This is normal operation and not a malfunction.

4. Door Switch

The microwave door has a safety switch that should activate and deactivate the fan when the door is opened or closed:

a. Door Alignment: Check if the door is properly aligned and closing securely. If the door doesn’t close correctly, the switch may not engage, causing the fan to run continuously.

b. Switch Inspection: Inspect the door switch for any visible damage or debris that may be preventing it from functioning correctly. If you find any issues, consider replacing the switch.

5. Control Board

If the above steps don’t resolve the issue, it’s possible that the problem lies with the control board:

a. Malfunctioning Control Board: The control board is the brain of the microwave, and if it’s malfunctioning, it can lead to various issues. If you suspect a control board problem, it’s best to consult a professional technician for diagnostics and potential replacement.

6. Warranty and Professional Assistance

If your Whirlpool microwave is still under warranty, consider contacting Whirlpool’s customer service or the retailer where you purchased it for assistance or a possible replacement. If the warranty has expired or you’re uncomfortable with DIY repairs, it’s advisable to seek the services of a qualified appliance repair technician.

7. Temperature Sensor

In some microwaves, especially those with convection cooking features, there may be a temperature sensor that controls the fan. If this sensor malfunctions, it can cause the fan to operate incorrectly.

a. Sensor Testing: If you have some technical knowledge and access to a multimeter, you can test the temperature sensor for continuity or resistance. Refer to your microwave’s user manual for sensor location and specific testing instructions.

b. Replace the Sensor: If you find that the temperature sensor is faulty, consider replacing it. However, this can be a more advanced repair task, and if you’re unsure about doing it yourself, consult a professional technician.

8. Overheating Protection

Microwaves have built-in safety mechanisms to prevent overheating. If the microwave’s internal components are too hot, the fan may run continuously to cool them down.

a. Allow Cooling: If you’ve been using the microwave extensively, especially for high-power cooking or extended periods, it may need time to cool down. Allow it to sit idle for a while and see if the fan turns off.

b. Ventilation: Ensure that the microwave’s ventilation is not blocked by any obstructions. Proper airflow is essential for cooling.

9. Software Update

In some modern microwaves, software issues can affect the fan operation. Manufacturers occasionally release software updates to address such problems.

a. Check for Updates: Visit the Whirlpool website or contact their customer support to inquire about available software updates for your microwave model. If an update is available, follow the provided instructions to install it.

10. Professional Technician

If you’ve gone through all the above steps and the issue persists, it may be time to call in a professional technician:

a. Safety First: Before attempting any further troubleshooting, unplug the microwave to ensure your safety.

b. Experienced Technician: An experienced technician can diagnose and repair complex issues like control board or sensor problems accurately. They have the necessary tools and expertise to handle these tasks safely.

c. Replacement Parts: If the technician identifies a faulty component, they can source and replace it, ensuring that your microwave operates as intended.

Remember, attempting advanced repairs without the required knowledge can be dangerous and may void any existing warranties. Always prioritize safety and consider professional assistance when necessary.

Possible Causes

Possible CausesDescriptionSolution
Faulty Control PanelThe control panel may be malfunctioning.Replace the control panel if necessary.
Stuck Fan SwitchThe fan switch might be stuck in one position.Inspect and replace the fan switch if needed.
Wiring IssuesWiring connections could be loose or damaged.Check and repair any damaged wires or connections.
Faulty Fan MotorThe microwave’s fan motor may be faulty.Replace the fan motor if it’s not working correctly.
Sensor ProblemsSensors responsible for fan control may be malfunctioning.Test and replace faulty sensors if required.

Troubleshooting Steps

Troubleshooting StepsDescription
Check Power SupplyEnsure the microwave is properly plugged in and receiving power.
Reset MicrowaveTry resetting the microwave by unplugging it for a few minutes.
Test Fan SwitchTest the fan switch for proper functionality.
Inspect Control PanelExamine the control panel for any visible issues or damage.
Sensor TestingTest the sensors to ensure they are sending the correct signals.

 Tools and Equipment

Tools and EquipmentDescription
ScrewdriverNeeded for opening the control panel and accessing components.
MultimeterUsed to test electrical connections and components for continuity.
Replacement PartsHave replacement fan switches, control panels, or fan motors on hand.
Wiring DiagramA wiring diagram for your specific microwave model can be helpful.
Safety GearWear safety gear, such as gloves and safety glasses, when working with electronics.

Safety Precautions

Safety PrecautionsDescription
Power OffAlways disconnect the microwave from the power source before working on it.
Capacitor DischargeDischarge the microwave’s capacitor to prevent electrical shocks.
Unplug and WaitAfter discharging the capacitor, unplug the microwave and wait for a few minutes.
Avoid WaterKeep all tools and hands dry when working on the microwave.
Read ManualsConsult the microwave’s user and service manuals for guidance.

Professional Help

When to Seek Professional HelpDescription
Complex RepairsIf the issue is beyond your expertise or involves major component replacements.
Warranty CoverageIf the microwave is under warranty, contact the manufacturer or service provider.
Electrical Safety ConcernsIf you are unsure about electrical safety measures or dealing with high voltage.
Lack of ProgressIf your DIY attempts do not resolve the problem, consider professional assistance.
Certified TechniciansContact certified appliance repair technicians for expert diagnosis and repair.


In summary, a Whirlpool microwave fan that won’t turn off or on can be due to various factors, ranging from simple power issues to more complex control board malfunctions. By following the troubleshooting steps outlined above, you can identify and address the problem, either on your own or with professional assistance, ensuring your microwave operates correctly once again.


Whirlpool Microwave Fan Won’t Turn Off Or On

Leave a Comment